Mutilayers Mesh Horizontal Hotmelt Gluing Machine

Muti-layers Mesh Horizontal Hotmelt Gluing Machine

1.Hot melt machine capacity: 10kg
2.Heating power: 6KW
3.Air pressure:0.6Mpa
4.Supply voltage: 380V/50HZ
5.M/C weight: 500kg
6.M/C size: 1400×1100×1600mm(L×W×H)

Safty:

1. Read and understand all the contents of this manual;

2. Before the machine starts, must make sure that there are no unsafe factors around and install a shield;

3. The total power supply should be cut off whether the machine is maintained or adjusted. Do not adjust the machine in the boot state;

4. Power supply should be turned off when power failure or temporary departure from the machine;

5. When the machine is in the working state, it cannot open the electric box door on the machine; remove the shield to avoid unnecessary danger;

6 .Electrical equipment related operations, preferably by electrical technicians. And after power off, wait 15 seconds to repair to prevent residual voltage;

7. Glue injection head must be completely cooled and broken before maintenance; preferably professional maintenance;

8 .No smoking in the workplace, no fireworks。